AT04 Connector Pin-Outs

AT04 connectors are used for POINT GPS ports and some POINT power ports.

The pin-outs are shown below.

• Related Articles

• Crown 2-Pin Power Cable

  Crown 2 PIN 12v DC Power Connector PIN Color Description A RED or WHITE + 12 V DC B BLACK  GROUND The wire colors inside the indicator are opposite of the chart above.

• Crown 4-Pin Load Cell Cable

  CROWN 4-PIN CONNECTOR WIRE ILLUSTRATION  PIN COLOR A WIRE BRAID B RED C BLACK D WHITE NOTE:  4 PIN Load Cells/Weigh-Bars can not be intermixed with 5-PIN Load Cells.   They can, however, be summed together at a junction box and utilized with a 5 PIN ...

• Pin-out for the 3 Pin Round Power End

  Pin 1: Constant On Pin 2: Key On/Off Pin 3: Ground Part Number: 1000-3124

• Instructions for Replacing AWT 5 Pin Crown Connector Ends

  Instructions for Replacing AWT 5 Pin Crown Connector Ends Step 1. Cut the damage ends off of the cables.     Step 2. Install the boot (P/N:24167-0017) onto the load cell cable.    Step 3. Strip back the outer shielding 1 ¼”.   Step 4. Insert the ...

• 8-pin Amp Connector to CP130 (Digi-Star Indicators) Cable

  Pin 2 Orange Pin 3 Yellow Pin 6 Green Photo of Cable above