Brent 1282 Grain Cart Scale Kit
Brent 1282
Questions to be asked to identify the correct scale variation....
1. What is the undercarriage of the grain cart, single axle, tracked, or walking tandem?
2. If the grain cart has tracks, does it have hydraulic tensioning, or mechanical tensioning?
3.If the grain cart is a single axel spindle, does it have a mounting system for a 5 POINT scale system? (see descriptions below)
Installation time for a single axle spindle kit is 6 hours or more.
Single Axle Spindle S/N B24850100 - B31270099
Kit Number
| Description
|
7200016 | Kit - BRNT 1282/ 3.75" Cast Pintle Hitch / 5.5" Single Axle
|
Identify prior to purchasing....
- This kit provides load cell spindles of 5.5" diameter.
![](//img.zohostatic.com/zde/static/images/exclamation.png)
This kit may also be used in place of a grain cart with a 5 POINT scale capability. It is recommended however that if the grain cart is equipped with mounts for the 5 POINT scale system, the spindle kit should not be utilized.
- Verify your hitch style looks similar to the picture below.
Please see the downloadable installation manual 7900023 for installation reference of this scale system.
Single Axle 5 POINT S/N B31270100 & UP
Kit Number
| Description
|
7200518 | Kit - BRNT 1282/ 3.75" Cast Pintle Hitch / 5 POINT
|
Identify prior to purchasing....
- This kit is a 5 point scale System. Below is a figure depicting the rear 4 points of the mounting which will be removed and replaced with load cells.
- Verify your hitch style looks similar to the picture below.
Please see the downloadable installation manual 7900411 for installation reference of this scale system.
Installation time for the tracked system is 6 hours or more.
Tracked (Hydraulic Tension)
Kit Number
| Description
|
7200009
| Kit - BRNT 1282/ 3.75" Cast Pintle Hitch / TRACKED
|
Identify prior to purchasing....
- This kit provides 4 load cell shafts that suspend the hopper, and an additional load-cell shaft for the hitch. The four rear points are shown in the figure below...
- Verify your hitch style looks similar to the picture below.
Please see the downloadable installation manual 7600410 for installation reference of this scale system.
Tracked (Mechanical Tension)
Typical installation time is 6 hours or more.
Kit Number
| Description
|
7200011
| Kit - BRNT 1282/ 3.75" Pintle Hitch / TRACKED
|
Identify prior to purchasing....
- This kit provides 2 load cell CT (Compression) that suspend the hopper over the track axles, and an additional load-cell shaft for the hitch. The picture below show the placement of the CT load cell. Typically there is a small shaft about the size of a soda can installed on the grain cart in place of the load cell. This will be replaced with a load cell during installation. See picture below.
- Verify your hitch style looks similar to the picture below.
Please see the downloadable installation manual 7900026 for installation reference of this scale system.
Walking Tandem Axle Spindles
Typical installation time is 9 hours or more.
(Click on the links in the left column to view the product pages on the website).
Kit Number
| Description
|
7200005
| Kit - BRNT 1282/ 3.75" Pintle Hitch / Walking Tandem
|
Identify prior to purchasing....
- This kit provides 4 load cell spindles of 3.75 diameter and a hitch load cell.
- Verify your hitch style looks similar to the picture below.
Please see the downloadable installation manual 7600387 for installation reference of this scale system.
Related Articles
BRENT 782 Grain Cart Scale System
BRENT 782 The Brent 772 Grain Cart Scale System is a completely bolt on type scale installation. There is no welding required. The Brent Grain Cart Scale system has two different variations depending on the style of the hitch. Attention must be ...
Brent 472 Grain Cart Scale Kit
BRENT 472 Questions to be asked to identify the correct scale variation.... 1. What is the serial number of the grain cart? 2. Does the grain cart have a bolted on "fixed" hitch that is bolted directly to the end cap, or does it have a swivel hitch ...
Brent 470 Grain Cart Scale Kit
BRENT 470 Questions to be asked to identify the correct scale variation.... 1. There are no questions to ask to properly identify the scale system for this model of grain cart. The Brent 470 Grain Cart is a completely bolt on type scale installation. ...
Brent 410 Grain Cart Scale System
BRENT 410 Questions to be asked to identify the correct scale variation.... 1. What is the measurement of the inside wheel bearing on this model of grain cart? (You will need to remove the wheel and measure the bearing size to order this grain cart ...
Brent 420 Grain Cart Scale Kit
BRENT 420 Questions to be asked to identify the correct scale variation.... 1. What is the measurement of the inside wheel bearing on the grain cart? (You will need to remove the wheel and measure the wheel bearing in order to order this kit). The ...