Brent 520 Grain Cart Scale System
BRENT 520
The Brent 520 Grain Cart is a weld on type installation. Typical installation time is 9 hours or more.
SCALE-TEC KIT NUMBERS
Identify prior to purchasing and installing this scale system...
- You will need to identify the inside bearing diameter is 2.75 inches.
There was a variation of the BRENT 520 grain cart that was manufactured with an inside bearing different from 2.75 inches. If your inside bearing is different from 2.75 inches in diameter, this kit will not work, and an updated bearing may be required.
Due to the spindle change, the tires will move to a wider base of 4 inches on each side.
Please see the downloadable installation manual for installation reference of this scale system.
Related Articles
BRENT 782 Grain Cart Scale System
BRENT 782 The Brent 772 Grain Cart Scale System is a completely bolt on type scale installation. There is no welding required. The Brent Grain Cart Scale system has two different variations depending on the style of the hitch. Attention must be ...Brent 410 Grain Cart Scale System
BRENT 410 Questions to be asked to identify the correct scale variation.... 1. What is the measurement of the inside wheel bearing on this model of grain cart? (You will need to remove the wheel and measure the bearing size to order this grain cart ...Brent 472 Grain Cart Scale Kit
BRENT 472 Questions to be asked to identify the correct scale variation.... 1. What is the serial number of the grain cart? 2. Does the grain cart have a bolted on "fixed" hitch that is bolted directly to the end cap, or does it have a swivel hitch ...Brent 470 Grain Cart Scale Kit
BRENT 470 Questions to be asked to identify the correct scale variation.... 1. There are no questions to ask to properly identify the scale system for this model of grain cart. The Brent 470 Grain Cart is a completely bolt on type scale installation. ...Brent 882 Grain Cart Scale System
BRENT 882 Single Axle Spindle There is only one option for the BRENT 882 grain cart kit with spindles. Scale-Tec does not provide the OEM kit option with the CT type of load cells (See description further below). We only recommend the OEM version ...