BRENT V1000 GRAIN CART SCALE KIT

Brent V1000 Grain Cart Scale Kit

Brent V1000


Questions to be asked to identify the correct scale variation....

1.  What is the undercarriage of the grain cart, single axle or tracked?

2. If the grain cart has single axles, are the axles rigid, or are they adjustable?


Installation time for a single axle spindle kit is 6 hours or more.


Single Axle RIGID


Kit Number
Description
7200644Kit - BRNT V1000/ 3.75" Cast Pintle Hitch / 4.5" Single Axle 


Identify prior to purchasing....

This kit should be used on V1000 carts with RIGID axles.  


- This kit provides load cell spindles of 4.5" diameter.    


- Verify your hitch style looks similar to the picture below.



Please see the downloadable installation manual 7900023 for installation reference of this scale system.

Single Axle 5 POINT ADJUSTABLE


Kit Number
Description
7200596Kit - BRNT V1000/ 3.75" Cast Pintle Hitch / 5 POINT


Identify prior to purchasing....

This kit should be used on V1000's with adjustable axles.


- This kit is a 5 point scale System.  Below is a figure depicting the rear 4 points of the mounting which will be removed and replaced with load cells.  

 


- Verify your hitch style looks similar to the picture below.



Please see the downloadable installation manual 7900411 for installation reference of this scale system.



Installation time for the tracked system is 6 hours or more.

Tracked


Kit Number
Description
7200597
Kit - BRNT V1000/ 3.75" Cast Pintle Hitch / TRACKED


Identify prior to purchasing....


- This kit provides 4 load cell shafts that suspend the hopper, and an additional load-cell shaft for the hitch.   The four rear points are shown in the figure below...



- Verify your hitch style looks similar to the picture below.



Please see the downloadable installation manual 7600410 for installation reference of this scale system.



    • Related Articles

    • BRENT 782 Grain Cart Scale System

      BRENT 782 The Brent 772 Grain Cart Scale System is a completely bolt on type scale installation. There is no welding required.    The Brent Grain Cart Scale system has two different variations depending on the style of the hitch.   Attention must be ...

    • Brent 472 Grain Cart Scale Kit

      BRENT 472 Questions to be asked to identify the correct scale variation.... 1. What is the serial number of the grain cart? 2. Does the grain cart have a bolted on "fixed" hitch that is bolted directly to the end cap, or does it have a swivel hitch ...

    • Brent 470 Grain Cart Scale Kit

      BRENT 470 Questions to be asked to identify the correct scale variation.... 1. There are no questions to ask to properly identify the scale system for this model of grain cart. The Brent 470 Grain Cart is a completely bolt on type scale installation. ...

    • Brent 410 Grain Cart Scale System

      BRENT 410 Questions to be asked to identify the correct scale variation.... 1.  What is the measurement of the inside wheel bearing on this model of grain cart?  (You will need to remove the wheel and measure the bearing size to order this grain cart ...

    • Brent 420 Grain Cart Scale Kit

      BRENT 420 Questions to be asked to identify the correct scale variation.... 1. What is the measurement of the inside wheel bearing on the grain cart?   (You will need to remove the wheel and measure the wheel bearing in order to order this kit). The ...