Calibrating POINT in the REAP App

The POINT scale can be calibrated through the REAP iOS app through the following steps.

1.      Open the REAP app, connect to the scale, and select the "My Operations" tab at the bottom of the screen.

2.      Select "Carts" on the left side of the operations screen.

3.      Select the cart that needs recalibrated from the list.

4.      The cart information and cart settings will appear on the right side of the screen.  Scroll down to the Scale Calibration window.

5.      Fill out the Observed Weight (weight from the grain cart) and the Certified Weight (weight from the elevator) and then press "Recalibrate" to complete the process.

 

Make sure that you only press Recalibrate ONCE.  If you press it more than once per calibration, it will over-shoot the correct calibration.

• Related Articles

• Adding Trucks in the REAP Mobile App

  Adding Trucks in the REAP Mobile APP

• Adding Destinations in the REAP Mobile App

  Adding Destinations in the REAP Mobile App

• Adding Operators in the REAP Mobile App

  Adding Operators in the REAP Mobile App

• REAP Mobile App - Adding a Grain Cart

  Adding a Grain Cart to the REAP mobile App

• Login to REAP Mobile App

  To login to utilize REAP, you must first register for a REAP account.  Please refer to the help article "Registering for REAP" to create and register a REAP account. After you have registered a REAP account, you will now be able to login and use the ...