PINOUT for AUTOLOG SENSOR
Pin-Out for Digi-Star Autolog Sensor
The below is the Pin out for the weather pack on a Digi-Star Autolog PTO sensor/Rotation Counter Sensor.
Pin A - Black
Pin B - Brown
Pin C - Blue
8-pin Amp Connector to CP130 (Digi-Star Indicators) Cable
Pin 2 Orange Pin 3 Yellow Pin 6 Green Photo of Cable above
Pin-out for the 3 Pin Round Power End
Pin 1: Constant On Pin 2: Key On/Off Pin 3: Ground Part Number: 1000-3124
Crown 2-Pin Power Cable
Crown 2 PIN 12v DC Power Connector PIN Color Description A RED or WHITE + 12 V DC B BLACK GROUND The wire colors inside the indicator are opposite of the chart above.
Crown 4-Pin Load Cell Cable
CROWN 4-PIN CONNECTOR WIRE ILLUSTRATION PIN COLOR A WIRE BRAID B RED C BLACK D WHITE NOTE: 4 PIN Load Cells/Weigh-Bars can not be intermixed with 5-PIN Load Cells. They can, however, be summed together at a junction box and utilized with a 5 PIN ...
Scale Link Pin-Out
Pin Out Function 1 + 12 vDC 2 CAN-H 3 - GND 4 CAN-L