Related Articles
Load Cell Connector Guide
Image Connector Type Description DT6 6 Pin Deutsch Connector - Used on all new Scale-Tec Scale Kits Crown 5 Pin Crown Connector - Used by Avery Weigh-tronix and Dinamica Generale M12 5 Pin M12 Connector, also known as EZ-Mate - Used on some Digi-Star ...
7601400 - Junction Bank Manual Rev A
Congratulations on the purchase of your new Scale-Tec DT06 Junction Bank. This Junction bank is designed to provide superior connection keeping dust and moisture out of the connection, as well as provide easy serviceability for troubleshooting ...
Pin-Out for Digi-Star Autolog Sensor
The below is the pin-out for the weather pack on a Digi-Star Autolog PTO sensor/Rotation Counter Sensor. Pin A - Black Pin B - Brown Pin C - Blue Sensor to pigtail color matching Black - White Brown - Red Blue. - Black
DT6 Junction Bank Overview
We recommend routing your load cell and weigh bar connections through the DT6 junction bank, which comes standard with all of our scale kits. Bare wire connections and damaged or weathered junction boxes are common trouble areas in a scale system. A ...
How to Identify a Remote or Serial Port
Digi-Star Ports The port on the left is a serial port. It has 8 male pins on the bottom of the indicator. Serial ports may be labeled as Serial, Printer, COM1/COM2, J904, or J905. The port on the right is a remote port. It has 8 female holes on ...