Connecting GT560, ERM, and Printer

NOTE: DS says this won't work, and the only reason we did this was because of what they wanted it to do.

The following settings need to be set in their entirety. ( a lot of them are already there )

Keep in mind that they are using CP130 thermal printers they got from someone else... The printers were setup at 9600, Even, 7. If the printer is setup differently set the 2201, 2202, and 2203 settings accordingly.

2101 -0

2201 - 9600

2202 - Even

2203 - 7

2211 - 9600

2212 - None

2213 - 8

2001 - MTLINE

2003 - ON

2004 - No

2204 - 0

6406 - ON

5001 - Com2

5002 - Com3

5003 - Com2

5005 - Com1

5006 - Com1

5007 - Com1

5009 - Com2

• Related Articles

• GT560 Settings for CP130

  These are the most likely settings to pair with a CP130 that was intended to be used with a Digistar indicator DAN# - Required Setting 2101 - 0 2201 - 1200 2202 - Even 2203 - 7 5005 - Com1 2304 - GT560A