Killbros 1311 Grain Cart Scale Kit
Killbros 1311
Questions to be asked to identify the correct scale variation....
1. What is the undercarriage of the grain cart, single axle, tracked, or walking tandem?
2. If the grain cart has tracks, does it have hydraulic tensioning, or mechanical tensioning?
Installation time for a single axle spindle kit is 6 hours or more.
Single Axle Spindle
| Kit Number | Description |
| 7200427 | Kit - KILLBROS 1311 / 3.75" Cast Pintle Hitch / 5.5" Single Axle |
Identify prior to purchasing....
- This kit provides load cell spindles of 5.5" diameter.
- Verify your hitch style looks similar to the picture below.
Please see the downloadable installation manual 7900023 for installation reference of this scale system.
Installation time for the tracked system is 6 hours or more.
Tracked (Hydraulic Tension)
| Kit Number | Description |
| 7200429 | Kit - KILLBROS 1311/ 3.75" Cast Pintle Hitch / TRACKED |
Identify prior to purchasing....
- This kit provides 4 load cell shafts that suspend the hopper, and an additional load-cell shaft for the hitch. The four rear points are shown in the figure below...
- Verify your hitch style looks similar to the picture below.
Please see the downloadable installation manual 7600410 for installation reference of this scale system.
Tracked (Mechanical Tension)
Typical installation time is 6 hours or more.
| Kit Number | Description |
| 7200428 | Kit - KILLBROS 1311/ 3.75" Pintle Hitch / TRACKED |
Identify prior to purchasing....
- This kit provides 2 load cell CT (Compression) that suspend the hopper over the track axles, and an additional load-cell shaft for the hitch. The picture below show the placement of the CT load cell. Typically there is a small shaft about the size of a soda can installed on the grain cart in place of the load cell. This will be replaced with a load cell during installation. See picture below.
- Verify your hitch style looks similar to the picture below.
Please see the downloadable installation manual 7900026 for installation reference of this scale system.
Walking Tandem Axle Spindles
Typical installation time is 9 hours or more.
(Click on the links in the left column to view the product pages on the website).
| Kit Number | Description |
| 7200430 | Kit - KILLBROS 1311/ 3.75" Pintle Hitch / Walking Tandem |
Identify prior to purchasing....
- This kit provides 4 load cell spindles of 3.75 diameter and a hitch load cell.
- Verify your hitch style looks similar to the picture below.
Please see the downloadable installation manual 7600387 for installation reference of this scale system.
Related Articles
Killbros 1200 Grain Cart Scale Kit
Killbros 1200 Questions to be asked to identify the correct scale variation.... There are no questions needed to identify the KILLBROS 1200 grain cart kit. The KILLBROS 1200 Grain Cart Scale System is a weld on type scale installation. Typical ...Killbros 1150 Grain Cart Scale Kit
Killbros 1150 There are no questions needed to help identify the KILLBROS 1150 Grain Cart Scale System. The KILLBROS 1150 Grain Cart Scale System is a completely bolt on type scale installation. There is no welding required. Typical installation ...Killbros 1160 Grain Cart Scale Kit
Killbros 1160 Questions to be asked to identify the correct scale variation.... 1. Does is the Measurement of the spindles on the grain cart (3.75" or 4.5")? The KILLBROS 1160 Grain Cart Scale System is a completely bolt on type scale installation. ...Killbros 1820 Grain Cart Scale Kit
Killbros 1820 Questions to be asked to identify the correct scale variation.... 1. Does is the Measurement of the spindles on the grain cart (3.75" or 4.5")? 2. Does the Grain Cart have large Metric Floater Tires? The KILLBROS 1820 Grain Cart Scale ...Killbros 1810 Grain Cart Scale Kit
Killbros 1810 Questions to be asked to identify the correct scale variation.... 1. Does is the Measurement of the spindles on the grain cart (3.75" or 4.5")? 2. Does the Grain Cart have large Metric Floater Tires? The KILLBROS 1810 Grain Cart Scale ...