Load Cell Connector Guide

Load Cell Connector Guide

ImageConnector TypeDescription

DT66 Pin Deutsch Connector - Used on all new Scale-Tec Scale Kits
Crown5 Pin Crown Connector - Used by Avery Weigh-tronix and Dinamica Generale
M125 Pin M12 Connector, also known as EZ-Mate - Used on some Digi-Star systems, espescially on Unverferth equipment
Flying LeadStripped wires with no connector
Flying Lead (AWT Pinout)Stripped wires with no connector - Red and Green wires are swapped to match Avery Weigh-tronix pinout (use when replacing an AWT load cell with no connector)

    • Related Articles

    • Load Cell Wire Functions

      Load Cell Wire Functions Function +EX -SIG +SIG -EX GROUND Digi-Star, RAVEN, Reliable RED GREEN WHITE BLACK TRANSPARENT Weigh-Tronics GREEN RED WHITE BLACK ORANGE Dinamica Generale, Eaton, Rice Lake, Rinstrum, Trans Cell, G-ELDER, Intercomp, Te Pari ...

    • Digi-Star Amp Load Cell Cable

    • Crown 4-Pin Load Cell Cable

      CROWN 4-PIN CONNECTOR WIRE ILLUSTRATION  PIN COLOR A WIRE BRAID B RED C BLACK D WHITE NOTE:  4 PIN Load Cells/Weigh-Bars can not be intermixed with 5-PIN Load Cells.   They can, however, be summed together at a junction box and utilized with a 5 PIN ...

    • 7601400 - Junction Bank Manual Rev A

      Congratulations on the purchase of your new Scale-Tec DT06 Junction Bank. This Junction bank is designed to provide superior connection keeping dust and moisture out of the connection, as well as provide easy serviceability for troubleshooting ...

    • Instructions for Replacing AWT 5 Pin Crown Connector Ends

      Instructions for Replacing AWT 5 Pin Crown Connector Ends Step 1. Cut the damage ends off of the cables.     Step 2. Install the boot (P/N:24167-0017) onto the load cell cable.    Step 3. Strip back the outer shielding 1 ¼”.   Step 4. Insert the ...