Model 615, Will Not Stay On Unless You Hold The Power Down

Scale Head Will Not Stay Turned On!?

If you are having troubles getting your indicator to stay on please check your voltage coming from your power source and the voltage coming from the connectors to your scale head.

The voltage should be sitting in between 12 & 13 volts. 

If you are reading higher than 13 this might be your problem.

Try using a different power source. 

It is usually recommended to run the power cable leads directly to the battery. 

• Related Articles

• Dashed Lines On Model 640XL

  ​ If you are having dashed lines on your Model 640XL or Model  640, on both the top and bottom of  the display please follow these steps: Step 1. Press & hold the "HOLD/MENU" button for 5 seconds or 3 beeps. Let go of the "HOLD/MENU"  button. ...

• Weigh-Tronix Model 700

  Weigh-Tronix Model 700 Download the file attachment below for a copy of the Weigh-Tronix 700 Indicator.

• Avery Weigh-Tronix Model 615 Operators Manual

  Avery Weigh-Tronix Model 615 Operators Manual Download the file attachment below for a copy of the operators manual.

• Weigh-Tronix Model 600 Operators Manual

  Weigh-Tronix Model 600 Operators Manual Download the pdf file attachment for a copy of the operators manual.

• Weigh-Tronix Model 402 Operators Manual

  Weigh-Tronix Model 402 Operators Manual Download the pdf file attachment below for a copy of the manual.