POINT is capable of displaying the scale weight on a virtual terminal.  The scale can also be zeroed and tared from the VT display.  This functionality is compatible with all tractors that have an ISOBUS display in the cab.

PTO detection over ISOBUS allows POINT to read the the PTO status of the tractor.  When used with the REAP software, this allows POINT to automatically record every time the grain cart is unloaded.  This functionality is only compatible with tractors that came from the factory with a PTO and fully integrated ISOBUS.  Tractor with ISOBUS harnesses or PTOs that were added after the tractor was built will not work with this feature.  Some general rules based on brand, model, and year are listed below:

John Deere 2008 and older:              Not Compatible

John Deere 2009-2011:                     Some work, others are not compatible (NO GUARANTEE)

John Deere 2012 and newer:            Compatible

Case IH 2008 and older:                    Not Compatible

Fendt 2014 and newer:                      Compatible

Massey Ferguson 2014 and newer:  Compatible

CAT Challenger A Series:                    Compatible

CAT Challenger B Series:                    Compatible

CAT Challenger C,D,&E:                      Not Compatible

GPS over ISOBUS allows POINT to attach two sets of Lat./Lon. coordinates to each load ticket that is recorded into the REAP software.  The first coordinate will be the approximate location that the combine loaded the grain cart.  The second coordinate marks where the grain cart was unloaded.  Compatibility of this feature is determined by the GPS receiver.  This feature is new and we hope to expand compatibility to include all major brands in the near future.

Starfire 3000 and newer:            Compatible

Ag Leader 6000 and newer:        Compatible

Case IH:                                         Not Compatible (Coming Soon)