POINT Troubleshooting Flowchart

• Related Articles

• Getting Started: Registering and Setup of Your POINT Device (iOS)

  Registering Your POINT Device All POINT devices are required to be registered to a user or organization.  This ensures proper ownership of the devices being utilized. It also ensures on boarding your future product support experiences through the ...

• Getting Started: Registering and Setup of Your POINT Device (Android)

  Registering Your POINT Device All POINT devices are required to be registered to a user or organization.  This ensures proper ownership of the devices being utilized. It will also ensure on boarding your future product support experiences through the ...

• Using POINT to Evenly Fill Multiple Hoppers on a Drill or Planter

  Using POINT to Evenly Fill Multiple Hoppers on a Drill or Planter Start with all hoppers empty and the POINT in gross mode. Zero the scale by pressing "ZERO" in the app or the furthest right button on the POINT (It looks like a O with a / through ...

• POINT ISOBUS Troubleshooting

  Check to make certain that the cables are connected correctly. When connecting POINT to ISOBUS the power port on the far left should be empty. The ISOBUS harness that provides power and connects POINT to the tractor must be plugged into the DT8 port ...

• Zero Balance POINT

  Zeroing POINT You can operate POINT from the keypad or the mobile device.   To Zero Point from the Keypad.... 1.  Press and hold the Zero Button on the right side of the keypad for three seconds.  A countdown will display until zero. NOTE:  We ...