Related Articles
Scale-Tec Point DT8 Connector
The Scale-Tec POINT system utilizes the 8 PIN connector (AT06-08SA-SR2BK) that supports the following interfaces: Serial (RS232) (COM1 and COM2) CANBus (ISOBUS) POWER 12v DC 3 Amp Digital I/O (AWT Base Connector Only) Below is the standard PINOUT for ...
Pin-out for the 3 Pin Round Power End
Pin 1: Constant On Pin 2: Key On/Off Pin 3: Ground Part Number: 1000-3124
Crown 2-Pin Power Cable
Crown 2 PIN 12v DC Power Connector PIN Color Description A RED or WHITE + 12 V DC B BLACK GROUND The wire colors inside the indicator are opposite of the chart above.
8-pin Amp Connector to CP130 (Digi-Star Indicators) Cable
Pin 2 Orange Pin 3 Yellow Pin 6 Green Photo of Cable above
Crown 4-Pin Load Cell Cable
CROWN 4-PIN CONNECTOR WIRE ILLUSTRATION PIN COLOR A WIRE BRAID B RED C BLACK D WHITE NOTE: 4 PIN Load Cells/Weigh-Bars can not be intermixed with 5-PIN Load Cells. They can, however, be summed together at a junction box and utilized with a 5 PIN ...