Selecting a destination within the REAP mobile app

Selecting a Destination in the REAP App

In order to select a Destination within the REAP mobile app, you must first create a destination within the web dashboard, or within the my operations section of the REAP mobile app.  To learn more about this see the help articles "adding a destination within the mobile app" and "setting up a destination within the web dashboard".


Destination starts at 0:52


The following instruction shows how to select a destination within the scale page of the REAP mobile app.







    • Related Articles

    • Scale Page Navigation

      <br> The scale page of the REAP app is the most common screen used within the app. The Scale Page is your main "go to" for making selections and ensuring you are collecting the harvest record accurately, the first time. Refer to the other help ...

    • Selecting an Operator within the REAP Mobile App

      Operators must first be setup in the REAP system, prior to selecting them within the Scale Page.  Please refer to the help article in the web dashboard setup to "add an operator". Operator starts at 0:18 The images below will guide you through ...

    • Load Ticket and Load History Page

      The REAP Load History can be accessed directly from the mobile app.   The intent of viewing the load history is to provide the ability to immediately correct a mistake on a load record, or to view load history.    The load history screen is not ...

    • Selecting a New Harvested Moisture Value

      The REAP system provides dry weight and dry bushel conversion dynamically according to the shrink schedule configured for the field and destination of the commodity. The moisture value set on the scale page will associate to the load record when the ...

    • Selecting a Grain Cart in REAP

      In order to view grain carts in a list, you must first setup grain carts within the "My Operations" area of the mobile app.  Please refer to the "My Operations" area of the help center and the help article regarding "adding a new bluetooth/scale ...