Settings for 640 to XLR Remote Displays

1. Press and hold the HOLD/MENU button for three beeps then release.

2. Enter "640".  Use RM to increase the displayed value and M+ to decrease it.  Press the HOLD/MENU button to move one digit to the left.

3. Press PRINT/SELECT to accept and "640" will be shown again.

4. Press PRINT/SELECT and CONFIG will be displayed

5. Press HOLD/MENU key repeatedly until RS232 is shown

6. Press PRINT/SELECT 

1. PORT 1 is displayed. 

7. Press PRINT/SELECT

1. BAUD is shown

- Press HOLD/MENU to get 9600 is displayed

2. Press PRINT/SELECT

- BAUD is displayed.

8. Press the HOLD/MENU 

1. PARITY is shown

- Press PRINT/SELECT   

- Press HOLD/MENU to get to NONE

2. Press PRINT/SELECT

9. PARITY is shown.

10. Press the HOLD/MENU key 

1. HAND is shown.

- Press PRINT/SELECT 

- Press HOLD/MENU to NONE

- Press PRINT/SELECT

11. HAND is shown.

12. Press the HOLD/MENU key

1. LAYOUT is shown.

- Press PRINT/SELECT 

- Press HOLD/MENU to REMOTE

2. Press PRINT/SELECT

13. LAYOUT is shown

14. Press G/N key once

1. Press the HOLD/MENU key to display PORT 2

15. Repeat steps 6 through 13 under PORT 2

16. Press the G/N key repeatedly to return to the gross weighing mode.