UNVERFERTH 1110 GRAIN CART SCALE KIT

Unverferth 1110 Grain Cart Scale Kit

Unverferth 1110


Questions to be asked to identify the correct scale variation....

1.  What is the undercarriage of the grain cart, single axle, tracked, or walking tandem?

2. If the grain cart is single axle, is it compatible with a 5 POINT scale system, or does it only provide slide out spindles?

3. Does the grain cart have large metric floater tires?

4. If the grain cart is tracked, does it have mechanical track tensioning, or does it have hydraulic track tensioning?


There are five variations of the Unverferth 1110 grain cart scale system.  Special attention must be paid attention to for undercarriage requirements. 



Installation time for a single axle spindle kit is 6 hours or more.

Single Axle (Spindle)


Kit Number
Description
7200334Kit - Unverferth 1110 / 3.75" Cast Pintle Hitch / 4.5" Single Axle Spindle


Identify prior to purchasing....


- This kit provides load cell spindles of 4.5" diameter.  

This kit should only be used with carts without metric/floater tires.   It should be known that if you have oversized tires and using it with this spindle kit, accuracy can be affected.

- Verify your hitch style looks similar to the picture below.



Please see the downloadable installation manual 7900023 for installation reference of this scale system.

Single Axle (5 POINT)


Kit Number
Description
7200526Kit - Unverferth 1110/ 3.75" Cast Pintle Hitch / 5 POINT

Installation of the 5 POINT system is 6 hours or more.

Identify prior to purchasing....


- This kit is a 5 point scale System.  Below is a figure depicting the rear 4 points of the mounting which will be removed and replaced with load cells.  

 


- Verify your hitch style looks similar to the picture below.



Please see the downloadable installation manual 7900411 for installation reference of this scale system.


Installation time for the tracked system is 6 hours or more.

Tracked (Mechanical Tension)


Typical installation time is 6 hours or more.


Kit Number
Description
7200339
Kit - Unverferth 1110 / 3.75" Pintle Hitch / TRACKED Mechanical Tensioning

Identify prior to purchasing....


- This kit provides 2 load cell CT (Compression) that suspend the hopper over the track axles, and an additional load-cell shaft for the hitch.     The picture below show the placement of the CT load cell.  Typically there is a small shaft about the size of a soda can installed on the grain cart in place of the load cell.  This will be replaced with a load cell during installation.  See picture below.


- Verify your hitch style looks similar to the picture below.

Please see the downloadable installation manual 7900026 for installation reference of this scale system.

Installation time for the tracked system is 6 hours or more.

Tracked (Hydraulic Tensioning)


Kit Number
Description
7200527
Kit - Unverferth 1110 / 3.75" Cast Pintle Hitch / TRACKED Hydraulic Tensioning

Installation of the scale system is 6 hours or more.

Identify prior to purchasing....


- This kit provides 4 load cell shafts that suspend the hopper, and an additional load-cell shaft for the hitch.   The four rear points are shown in the figure below...



- Verify your hitch style looks similar to the picture below.



Please see the downloadable installation manual 7600410 for installation reference of this scale system.



Walking Tandem Axle Spindles

Typical installation time is 9 hours or more.

(Click on the links in the left column to view the product pages on the website).


Kit Number
Description
7200349
Kit - Unverferth 1110 / 3.75" Pintle Hitch / Walking Tandem 

Identify prior to purchasing....


- This kit provides 4 load cell spindles of 3.75 diameter and a hitch load cell.


- Verify your hitch style looks similar to the picture below.


Please see the downloadable installation manual 7600387 for installation reference of this scale system.


    • Related Articles

    • BRENT 782 Grain Cart Scale System

      BRENT 782 The Brent 772 Grain Cart Scale System is a completely bolt on type scale installation. There is no welding required.    The Brent Grain Cart Scale system has two different variations depending on the style of the hitch.   Attention must be ...

    • Unverferth 4500 Grain Cart Scale Kit

      Unverferth 4500 Questions to be asked to identify the correct scale variation.... 1.  What is the measurement of the inside wheel bearing on this model of grain cart?  (You will need to remove the wheel and measure the bearing size to order this ...

    • Unverferth 4900 Grain Cart Scale Kit

      Unverferth 4900 Questions to be asked to identify the correct scale variation.... 1.  What is the measurement of the inside wheel bearing on this model of grain cart?  (You will need to remove the wheel and measure the bearing size to order this ...

    • Unverferth 8200 Grain Cart Scale Kit

      Unverferth 8200 Questions to be asked to identify the correct scale variation.... 1. Does the grain cart have large "metric" floater tires? The Unverferth 8200 Grain Cart Scale System is a completely bolt on type scale installation. There is no ...

    • Unverferth 7200 Grain Cart Scale Kit

      Unverferth 7200 Questions to be asked to identify the correct scale variation.... 1. Does the grain cart have large "metric" floater tires? The Unverferth 7200 Grain Cart Scale System is a completely bolt on type scale installation. There is no ...