Using Harvest Tracker to Create Individual Field Reports

Using Harvest Tracker to Create Individual Field Reports

Using Harvest Tracker to Create Individual Field Reports

1.      Power on the indicator and insert USB drive into the indicator.



2.      The Data Transfer Menu should appear automatically.  Press "ENTER" to copy records to the USB. After that transfer is complete, press "1" to copy Fields and ID's to the USB.  Once the indicator returns to the Data Transfer Menu, press "ESC" to exit and remove the USB drive.


3.      Insert the USB drive into a computer and open Harvest Tracker.  If Harvest Tracker asks to Auto Find, click yes.  Verify that the selected drive is the USB drive.  The selected drive is shown at the top left of the Harvest Tracker window.



4.      Click the field button in the top left. 

 In the field window that opens click "Import from USB".

Repeat this step for both ID's and Crops.


5.      Click "Reporting" then select "Report Generator" from the drop-down menu.



6.      In the Fields tab, click the "UnCheck All" button.  Then, select an individual field you would like to export a report for.


7.      Under the Reports heading, select the format that you wish the export to be created in.

    • Related Articles

    • Installing Harvest Tracker PC Software

      Installing Harvest Tracker PC Software 1.      Insert the Harvest Tracker USB drive into the USB port of the computer. 2.      Open the drive on the computer if it does not open automatically. 3.      Double click the "Setup" file and follow the ...

    • Erasing Records and Accumulator Memory on a GT560

      The below instruction shows how to erase records on a GT560 and has been referenced from the GT560 Indicator Manual from Digi-Star.

    • Using the Setpoint Feature on EZIII Indicators

      Using The Setpoint Feature on EZIII Indicators Setpoint is a feature that allows the operator to set a gross weight that will activate the +12VDC Relay Output on PIN 4 of the J901 power connector. This feature is commonly used for automations or ...

    • Erasing Records on the GT460 Indicator

      The instructions below cover clearing load ticket and accumulator memory on a Digi-Star GT460, Unverferth 510, 512 and 520 Indicator. The Instructions below are presented in the video above.

    • Digi-Star ST3400 Operators Manual

      Digi-Star ST3400 Operators Manual Download the pdf file attachment below for the Digi-Star ST3400 Operators Manual