Wiring Quarter Bridge Load Cells in a Lever-Lock Junction Box

Wiring Quarter Bridge Load Cells in a Lever-Lock Junction Box



Eaton

Function
J-Box Cable (DS)
Load Cell 1
Load Cell 2
Load Cell 3
Load Cell 4
+Sig
White
White

White

-Sig
Green

White

White
+Ex
Red
Black
Red
Black
Red
-Ex
Black
Red
Black
Red
Black
Shield
Shield
Green
Green
Green
Green

AWT 4-Pin
Function
J-Box Cable (DS)
Load Cell 1
Load Cell 2
Load Cell 3
Load Cell 4
+Sig
White
Black

Black

-Sig
Green

Black

Black
+Ex
Red
White
Red
White
Red
-Ex
Black
Red
White
Red
White
Shield
Shield
Green
Green
Green
Green


The above charts show which load cell wires should be paired with each wire from the J-box cable.

For example: When using eaton load cells the white J-box cable wire will have two white wires connected to it. The green J-box cable wire will have the other two white wires connected to it.  The red wire will have two reds and two blacks connected to it.  The black wire will have two reds and two blacks connected to it.  Shield wire will have all four green load cell wires connected to it.

    • Related Articles

    • Crown 4-Pin Load Cell Cable

      CROWN 4-PIN CONNECTOR WIRE ILLUSTRATION  PIN COLOR A WIRE BRAID B RED C BLACK D WHITE NOTE:  4 PIN Load Cells/Weigh-Bars can not be intermixed with 5-PIN Load Cells.   They can, however, be summed together at a junction box and utilized with a 5 PIN ...
    • 7601400 - Junction Bank Manual Rev A

      Congratulations on the purchase of your new Scale-Tec DT06 Junction Bank. This Junction bank is designed to provide superior connection keeping dust and moisture out of the connection, as well as provide easy serviceability for troubleshooting ...
    • How to Wire a Junction Box When the Indicator and Load Cells are Different Brands

      How to Wire a Junction Box When the Indicator and Load Cells are Different Brands Compare the wire functions between the two brands and identify which colors should be paired. If wires need to be switched, it is easiest to move only the wires of the ...
    • DT6 Junction Bank Overview

      We recommend routing your load cell and weigh bar connections through the DT6 junction bank, which comes standard with all of our scale kits. Bare wire connections and damaged or weathered junction boxes are common trouble areas in a scale system. A ...
    • Load Cell Wire Functions

      Load Cell Wire Functions Function +EX -SIG +SIG -EX GROUND Digi-Star, RAVEN, Reliable RED GREEN WHITE BLACK TRANSPARENT Weigh-Tronics GREEN RED WHITE BLACK ORANGE Dinamica Generale, Eaton, Rice Lake, Rinstrum, Trans Cell, G-ELDER RED WHITE GREEN ...