Zeroing POINT

Zero Balance POINT

Zeroing POINT


You can operate POINT from the keypad or the mobile device.  

To Zero Point from the Keypad....


1.  Press and hold the Zero Button on the right side of the keypad for three seconds.  A countdown will display until zero.



NOTE:  We deliberately provided the timer on the zero button to ensure the zeroing of the scale was a deliberate action, and to prevent from inadvertently bumping the keypad during operation.


    • Related Articles

    • Recovering the Weight of Your POINT Device (iOS)

      Adjusting your Weight We all have oops moments in our lives, and when it comes to scales sometimes that can happen by not turning the scale on before you load a grain cart, seed tender, feed wagon, TMR mixer or something of the sort. We allow you to ...

    • POINT Firmware Release Notes

      Firmware (Version 1) Release Notes This article is a running list of release notes for the various firmware releases for the POINT Scale Display. Please refer to this article for bug fixes, feature releases, and improvements. Version 1.0.0 (Initial ...

    • POINT Livestock Chute Settings

      Lock-on Start Time The delay (in seconds) before starting the weight sampling after activation of lock-on detection. Permissible Range: 1 - 10 seconds. 2 is the recommended minimum.  Increase if “weighing” starts before the animal is completely on ...

    • POINT Device Settings: Adjusting an Individual Setting (iOS)

      Settings POINT supports a whole new method to making settings changes on the hardware.   You may be familiar with other brands of indicator which require a button sequence and timing sequence to access settings menus.   With POINT, all of that goes ...

    • Using the POINT App as a Remote Display (iOS)

      LIVE Scale Page POINT communicates via Bluetooth Wireless Long Range technology.  It has a 2500 Ft reception range and can be simultaneously connected to as many iPhones and iPads near by the POINT device.   This allows for multiple remote display ...