Procedures and Guides
Programming Clicker Remote
Digi-Star Setup Numbers
Unverferth 520 Displays "INVALID" When Entering D.A.N.
In the past, all Unverferth 520 used the same settings and D.A.N. as the GT460. Unverferth is now selling Unverferth 520 indicators that instead share settings and D.A.N. with the GT560. If the indicator says "AutoLog" on the face plate, it probably ...
Stock Weigh Settings
Setting D.A.N. Description SW Default ZTRACK 104 Adjusts to zero for build-up of snow, mud and manure. Weight value can be set from 1 to 99 lbs/kgs or OFF (00) Weigh Method 5 W MTHD 105 Select weight method. LOCK LOCKON 106 Higher value will lock on ...
Auto Gate Settings for GT560
Auto Gate Settings for GT560 6401 - RPM 6402 - 300 6403 - 100 4001 - WEIGHT 4002 - 0 4005 - PREACT 4101 - SIG 12V 6303 - 0.0 4004 - 1 6302 - STORED 6301 - LOAD 6305 - WEIGHT 6306 - 2,500 (TOLERANCE may need adjusted)
Entering Long Form Settings in GT460, UNV510, UNV512, and UNV520
Hold HELP then ON until the arrow disappears Press ZERO x 2 Press HELP x 2 Press SELECT x 3 Press HELP Press ZERO There should now be a 15 minute timer on the screen. Press ZERO x 5 Press HELP x 3 Press SELECT x 3 The Long Form Settings should now be ...
EZfeed Setup for Digi-star Indicators (EZIV)
EZfeed Setup for Digi-star Indicators (EZIII)
Using the Setpoint Feature on EZIII Indicators
Using The Setpoint Feature on EZIII Indicators Setpoint is a feature that allows the operator to set a gross weight that will activate the +12VDC Relay Output on PIN 4 of the J901 power connector. This feature is commonly used for automations or ...
Using Harvest Tracker to Create Individual Field Reports
Using Harvest Tracker to Create Individual Field Reports 1. Power on the indicator and insert USB drive into the indicator. 2. The Data Transfer Menu should appear automatically. Press "ENTER" to copy records to the USB. After that ...
Installing Harvest Tracker PC Software
Installing Harvest Tracker PC Software 1. Insert the Harvest Tracker USB drive into the USB port of the computer. 2. Open the drive on the computer if it does not open automatically. 3. Double click the "Setup" file and follow the ...
Digi-Star ERM Wi-Fi Settings
ERM Wi-Fi Settings for Digi-Star Indicators If your Wi-Fi device is not working, please verify that these settings are correct. Option Setting changes using Direct Access Numbers (D.A.N.) for Digi-Star indicators with numeric Key Pads: Directly enter ...
Erasing Records on the GT460 Indicator
The instructions below cover clearing load ticket and accumulator memory on a Digi-Star GT460, Unverferth 510, 512 and 520 Indicator. The Instructions below are presented in the video above.
Erasing Records and Accumulator Memory on a GT560
The below instruction shows how to erase records on a GT560 and has been referenced from the GT560 Indicator Manual from Digi-Star.