John Deere 1990 CCS
Soldering Rin Bars
Remove inline connection Remove a couple inches of the outside coating on both sides and strip back each wire about 3/8" - 1/2" Place adhesive lined shrink tube over the cable before connecting wires. Swap the green and white wires, all others will ...
JD 1990 / Rin Bar Drifting Issues
Repair Bulletin Date: 02/01/2022 Problem & Symptoms The 6” connection from the 7601110 weigh bar can periodically make/lose connection. This causes intermittent weights, usually drifting only a couple hundred pounds. However, we have seen the weight ...
Troubleshooting John Deere Box Drills
Troubleshooting John Deere Box Drills John Deere box drills such as the 750, 1560, and 1590 have some special considerations when troubleshooting. Due to the design of these drills, certain mechanical components of the drill can bind or exert force ...