Scale-tec Support Center



Visit Knowledge Base

Browse through our collection of articles, user guides and FAQs.


My Tickets

View your previous tickets; know their statuses and solutions.


    • Recent Articles

    • Scale Link 100-200

      Scale Link 100-200 control board Check to make sure the power light is on Wires are tight Fuse is good Data LED is blinking / on
    • POINT ISOBUS Troubleshooting

      Check to make certain that the cables are connected correctly. When connecting POINT to ISOBUS the power port on the far left should be empty. The ISOBUS harness that provides power and connects POINT to the tractor must be plugged into the DT8 port ...
    • Soldering Rin Bars

      Remove inline connection Remove a couple inches of the outside coating on both sides and strip back each wire about 3/8" - 1/2" Place adhesive lined shrink tube over the cable before connecting wires. Swap the green and white wires, all others will ...
    • Settings for 640 to XLR Remote Displays

      Settings for 640 to XLR Remote Displays Press and hold the HOLD/MENU button for three beeps then release. Enter "640". Use RM to increase the displayed value and M+ to decrease it. Press the HOLD/MENU button to move one digit to the left. Press ...
    • Warranty Claim for Scale-Tec

      Download the attached document and send a completed form with each warranty return. If you have questions, please call us at 888-962-2344.