8-pin Amp connector to CP130 (Digi-Star Indicators) cable

8-pin Amp Connector to CP130 (Digi-Star Indicators) Cable


Pin 2
Orange
Pin 3
Yellow
Pin 6
Green


Photo of Cable above

    • Related Articles

    • Scale-Tec Point DT8 Connector

      The Scale-Tec POINT system utilizes the 8 PIN connector (AT06-08SA-SR2BK) that supports the following interfaces: Serial (RS232) (COM1 and COM2) CANBus (ISOBUS) POWER 12v DC 3 Amp Digital I/O (AWT Base Connector Only) Below is the standard PINOUT for ...
    • Amp Power Cable

    • Digi-Star Amp Load Cell Cable

    • Crown 2-Pin Power Cable

      Crown 2 PIN 12v DC Power Connector PIN Color Description A RED or WHITE + 12 V DC B BLACK  GROUND The wire colors inside the indicator are opposite of the chart above.
    • Crown 4-Pin Load Cell Cable

      CROWN 4-PIN CONNECTOR WIRE ILLUSTRATION  PIN COLOR A WIRE BRAID B RED C BLACK D WHITE NOTE:  4 PIN Load Cells/Weigh-Bars can not be intermixed with 5-PIN Load Cells.   They can, however, be summed together at a junction box and utilized with a 5 PIN ...