Enabling ISOBUS Communication on POINT
To enable ISOBUS communication on a POINT indicator, a setting must be turned on through the POINT mobile app.
1. Download the POINT mobile app, create an account, and connect to the POINT via Bluetooth.
For more information on this step, follow the link below:
2. On the Live Scale screen, tap the "Choose Mode" button.
For more information on this step, follow the link below:
3. Select the mode called "ISOBUS - ON" and press SELECT
4. Once the mode has been applied, turn the key off so the POINT and the tractor display both shutdown.
5. Power everything back on and wait 1 minute. The POINT will usually appear in the ISOBUS VT menu on the display about 30 seconds after the display has completed it's startup.
Related Articles
POINT Firmware Release Notes
Firmware (Version 1) Release Notes This article is a running list of release notes for the various firmware releases for the POINT Scale Display. Please refer to this article for bug fixes, feature releases, and improvements. Version 1.0.0 (Initial ...
POINT Device Settings: Adjusting an Individual Setting (iOS)
Settings POINT supports a whole new method to making settings changes on the hardware. You may be familiar with other brands of indicator which require a button sequence and timing sequence to access settings menus. With POINT, all of that goes ...
Using POINT to Evenly Fill Multiple Hoppers on a Drill or Planter
Using POINT to Evenly Fill Multiple Hoppers on a Drill or Planter Start with all hoppers empty and the POINT in gross mode. Zero the scale by pressing "ZERO" in the app or the furthest right button on the POINT (It looks like a O with a / through ...
Zero Balance POINT
Zeroing POINT You can operate POINT from the keypad or the mobile device. To Zero Point from the Keypad.... 1. Press and hold the Zero Button on the right side of the keypad for three seconds. A countdown will display until zero. NOTE: We ...
POINT Quick Start Guide
Quick Start Guide Use this Quick Start Guide to help you get set up and running immediately. Refer to the help center for additional instructions and answers to questions..... Lets get started. Package Contents (Inside the box) Tools Required ...