GT400 Calibration Procedures

GT400 and UNVERFERTH 410 Calibration

GT400 and Unverferth 410 Calibration Video




    • Related Articles

    • GT460, Unverferth 510, 512, 520 Calibration

      Watch the video to calibrate your Indicator
    • Avery Weigh-Tronix Load Cell Calibration Numbers

      The reading @ 0.4mV/V can be used as the Calibration number for a Digi-star indicator, or the Custom number on a Weigh-tronix indicator.
    • Changing Setup and Calibration Numbers in a Digi-Star Indicator

      Changing Setup and Calibration Numbers in a Digi-Star Indicator 1. Hold the ZERO button and the ON button until "SETUP" is shown on the screen. 2. After "SETUP" the indicator will display its current setup number with the last digit flashing. A good ...
    • Libra/iForeman Calibration and Operation

      Libra/iForeman Connecting the APP to the I-Foreman/Libra Device:  I)      Open APP and go to SETTINGS tab. 2)      Push the + button on the top left of APP. 3)      Once the APP finds the device type in the Cart Name, then push Okay. Calibrating the ...
    • Avery Weigh-Tronix 1040 Indicator calibration

      Push and hold the MENU key until it says “SETPAS”. (*Note: If the indicator just sits there and beeps after 3-4 seconds, let go of the MENU key, at that point “SETPAS” should appear)  Type 1040  Once “1040” is on the screen press SELECT. (*At this ...