JM 810 Grain Cart Scale Kit
J&M 810
Questions to be asked to identify the correct scale variation....
1. Does the grain cart have large "metric" floater tires (if it has single axles)?
2. Does the Grain Cart have four sleeves welded to the underside of the axle with inside diameter of 2.88"?
-See Variation 3 for an illustration of the sleeves.
If a 5 POINT scale system is needed, SPECIAL ATTENTION MUST BE CONSIDERED regarding the hole measurement in the sleeves on the five POINT systems. See variation 3 more detail.
Variation (1) 3.75" Single Axle
(Click on the links in the left column to view the product pages on the website).
This kit is completely bolt on. Expect installation time to take 6 hours or more.
| Kit Number | Description |
| 7200569 | Kit - J&M 810 / 2.88" Pintle Hitch / 3.75" Single Axle |
Identify prior to purchasing....
- This kit provides load cell spindles of 3.75 diameter.
This kit can only be used with carts without metric/floater tires. The spindle is reduced to 3.75 via a bushing insert in the spindle sleeve. DO NOT ORDER THIS KIT IF YOU HAVE LARGE FLOATER TIRES!
-Verify your hitch looks similar to the image below.
Please see the downloadable installation manual 7900230 for installation reference of this scale system.
Variation (2) 4.5" Single Axle Spindle
(Click on the links in the left column to view the product pages on the website).
This kit is completely bolt on. Expect installation time to take 6 hours or more.
| Kit Number | Description |
| 7200570 | Kit - J&M 810 / 2.88" Pintle Hitch / 4.5" Single Axle |
Identify prior to purchasing....
- This kit provides load cell spindles of 4.5 diameter.
This kit is required if you have large metric floater tires on the grain cart.
- Verify the hitch looks like the image below.
Please see the downloadable installation manual 7900230 for installation reference of this scale system.
Variation (3) 5 POINT
(Click on the links in the left column to view the product pages on the website).
This kit is completely bolt on. Expect installation time to take 6 hours or more.
| Kit Number | Description |
| 7200533 | Kit - J&M 810 / 5 POINT |
Identify prior to purchasing...
- This kit provides four load cells that support the hopper on top of the axels. Verify your grain cart has the mounting sleeves welded to the axels shown with the arrows in the diagram below...
A measurement of the hole spacing in the sleeve must be taken between the edge of the sleeve and center of the hole. This kit supports a 2 1/4 inch hole spacing. See figure below...
- Verify your hitch style looks similar to the picture below.
Please see the downloadable installation manual 7600232 for installation reference of this scale system.
Related Articles
JM 450 Grain Cart Scale Kit
J&M 450 Questions to be asked to identify the correct scale variation.... 1. There are no questions to ask for the J&M 450 grain cart. There is only one variation. The J&M 450 Grain Cart is a weld on type installation. Typical installation time ...JM 1326 Grain Cart Scale Kit
J&M 1326 Questions to be asked to identify the correct scale variation.... 1. What undercarriage type does the grain cart have, Single Axle, Tracked, Walking Tandem? 1. What year is the Grain Cart? -Biggest consideration in year of grain ...JM 525 Grain Cart Scale Kit
J&M 525 Questions to be asked to identify the correct scale variation.... 1. What does the hitch area look like?... -Is it welded directly to the "A-Frame" of the hitch area? or -Does it have a sleeve welded ...JM 1500 Grain Cart Scale Kit
J&M 1500 Questions to be asked to identify the correct scale variation.... 1. What undercarriage type does the grain cart have, Single Axle, Tracked, Walking Tandem? 1. What year is the Grain Cart? -Biggest consideration in year of grain ...JM 1400 Grain Cart Scale Kit
J&M 1400 Questions to be asked to identify the correct scale variation.... 1. What undercarriage type does the grain cart have, Single Axle, Tracked, Walking Tandem? 1. What year is the Grain Cart? -Biggest consideration in year of grain ...