Scale Link 2 Update Procedure for SL2110 & SL2140

Scale Link 2 Update Procedure for SL2110 & SL2140

The required files are attached.  Save both files to an empty flash drive.  They cannot be saved within a folder.

• Related Articles

• Scale Link 100-200

  Scale Link 100-200 control board Check to make sure the power light is on Wires are tight Fuse is good Data LED is blinking / on

• ISO Setup and Calibration Instructions

  OLD AND NEW STYLE ISO SETUP AND CAL INSTRUCTIONS Step 1: Select the Digi-Star tab on the VT screen USE THE METHOD BELOW IF OLDER STYLE ISO Press Setup Once. To change the number Press Select to change the flashing digit. Press Function to move the ...

• EZ4 Scale Link Status Error Chart

  Scale Link Box Fault Status (SL2110)

• Clearing the Object Pool in a John Deere 2600/2630 Display