EZ4 Scale Link Status Error Chart

EZ4 Scale Link Status Error Chart

Scale Link Box Fault Status (SL2110)



























    • Related Articles

    • Scale Link 100-200

      Scale Link 100-200 control board Check to make sure the power light is on Wires are tight Fuse is good Data LED is blinking / on

    • Scale Link 2 Update Procedure for SL2110 & SL2140

      Scale Link 2 Update Procedure for SL2110 & SL2140 The required files are attached.  Save both files to an empty flash drive.  They cannot be saved within a folder.

    • POINT ISOBUS Compatibility

      VT Display POINT is capable of displaying the scale weight on a virtual terminal. The scale can also be zeroed and tared from the VT display. This functionality is compatible with all tractors that have an ISOBUS display in the cab. PTO Detection ...