Check to make certain that the cables are connected correctly. When connecting POINT to ISOBUS the power port on the far left should be empty. The ISOBUS harness that provides power and connects POINT to the tractor must be plugged into the DT8 port ...
Remove inline connection Remove a couple inches of the outside coating on both sides and strip back each wire about 3/8" - 1/2" Place adhesive lined shrink tube over the cable before connecting wires. Swap the green and white wires, all others will ...
Settings for 640 to XLR Remote Displays Press and hold the HOLD/MENU button for three beeps then release. Enter "640". Use RM to increase the displayed value and M+ to decrease it. Press the HOLD/MENU button to move one digit to the left. Press ...
Watch this video to calibrate your indicator. Press and hold the "Hold/Menu" button for three beeps then release. Enter "640". Use "RM" to increase the displayed value and "M+" to decrease it. Press the "Hold/Menu" button to move one digit to the ...