MY OPERATIONS PAGE
Calibrating POINT in the REAP App
The POINT scale can be calibrated through the REAP iOS app through the following steps. 1. Open the REAP app, connect to the scale, and select the "My Operations" tab at the bottom of the screen. 2. Select "Carts" on the left side of the operations ...
Updating POINT Firmware Through the REAP Mobile App
Updating POINT® Firmware This video shows you how to update your POINT® firmware directly from the REAP mobile app. Written instructions are provided below the video. IMPORTANT: Do not disconnect power from the POINT® display during the update ...
Load Ticket Recovery
Load Ticket Recovery The load ticket recovery function can be helpful if you believe your POINT indicator recorded loads but those loads are not appearing in the REAP app. Load ticket recovery searches POINT's memory for any loads that are not ...
Adding Operators in the REAP Mobile App
Adding Operators in the REAP Mobile App
Adding Destinations in the REAP Mobile App
Adding Destinations in the REAP Mobile App
Adding Trucks in the REAP Mobile App
Adding Trucks in the REAP Mobile APP
Adding a Field in the Reap Mobile App
Adding a Field in the Reap Mobile App
Adding a Grain Cart to REAP
Adding a Grain Cart to REAP This help article provides instruction to add a grain cart to your REAP account by connecting to your bluetooth enabled scale. You can only add a Grain Cart through the mobile app. You can not add a grain cart through ...